-01-01.png)
Daktronics Omnisport 2000 console has a convenient built-in thermal printer which gives results printouts in under 10 seconds.
Correct Paper Installation
1. Remove the cover from the printer by turning the knob with the arrow to the left 1/4 turn, or until the arrow points left. Remove the cover by lifting up and forward on the knob
2. Remove the old roll of paper.
3. Using a pair of scissors, cut the new roll of paper off to make the end of the paper square.
4. Place the roll of paper into the printer compartment so that the paper feeds up from underneath the roll (below image)
If the paper is placed incorrectly, the printer will act like it is printing, but no text will appear on the paper. (below image)
5. Place the newly cut squared edge of the paper into the back side of the black rubber roller on the printer. The printer should automatically advance—pulling the paper through the printer.
6. Place the cover back on and turn the latch to secure.
The thermo printer paper can be ordered from Toth's Sports/Daktronics—part # SF-1034. Thermo printer paper is also readily available at office supply stores (58mm wide and 165' long max).