-01-01.png)
It is important to become familiar with the connections on the back of the Omnisport 2000 timing console. Make ALL connections to the Omnisport 2000 console and attached equipment BEFORE turning on the console’s power switch.
Equipment:
Single ended pool with Hy-Tek MEET MANAGER software and a numeric scoreboard.
Connections to Use:
J2 or J3– SCOREBOARD OUTPUTS to control single or multi-line scoreboards, event/heat, score, and lengths/record time modules
J6 – RESULTS PORT or ETHERNET jack for bi-directional communication with results programs such as Hy-Tek’s MEET MANAGER
Omnisport and Hy-Tek Quick Guide (Serial)
Omnisport and Hy-Tek Quick Guide (Network)
J10 – NEAR END lane harness (in-deck or on-deck)
J12 – START INPUT from horn start
J13 – POWER IN from wallpack transformer
Equipment:
Far End (Split End) lane harness (in-deck or on-deck)
Connections to Use:
J11 – FAR END lane harness (in-deck or on-deck)
Equipment:
Omnisport Pro software
Connections to Use:
J4 – EXPANSION PORT or ETHERNET jack for bi-directional communication with Omnisport Pro software.
Equipment:
Matrix Scoreboard
Connections to Use:
J5 – RTD PORT or ETHERNET jack for bi-directional communication with Daktronics display control software (or CTS scoreboard, J5 only)
Equipment:
Judges Console
Connections to Use:
J14 – NEAR LANE for Judge console
J15 – FAR LANE for Judge console
A maximum of 9 judges can be plugged into either J14 or J15. Diving has a maximum of 9 judge consoles. Synchronized swimming has a maximum of 18 consoles. (Example: 4 judges on one side of the dive well are plugged into J14 and 3 judges on the other side of the pool are plugged into J15 for a total of 7 judges.)