1. Hold "CONFIG" Key on handheld for 5 seconds.

2. The handheld should read "Press ENT to set Channel.*

3. Press the "Enter/Yes/" button.

4. Enter new channel *

5. Press Enter.

6. The handheld should read "Press ENT to set contrast"

7. Press the "Clear/No" button.

8. The handheld should read "Attempt to Connect?"

9. Press the "Enter/Yes" Button

10. Verify connection.

*Note: Cannot select group or channel 0 on RC-200 handheld

#rc100 #rc200 #channel